What to look for in an ACD

The effectiveness and efficiency of an ACD can be measured directly by how large a volume of air and how high an air speed can be produced. This air flow must then be evenly distributed across the nozzle length. To accomplish this large balance of air movement requires LARGE VOLUME DUCT SYSTEMS. The large duct allows large volumes of air and higher pressures to be delivered efficiently to the curtain increasing the oxygen and raising the fire temperatures, thus increasing the consumption of burnable material. Air speed or air velocity not only provides the smoke seal over the and the re-circulation resulting in an increase in turbulence's allowing for a faster and more complete burn. Contrary to some, the extra oxygen/air is consumed by the hotter fire creating a neutral pressure between the underside of the curtain and the atmosphere pressre above. Note: the horsepower requirements, air flow in cubic feet per minute, airspeed and the pressure distribution across the nozzle. Concept Products' ACD's produce more air at higher speeds/velocity evenly at the nozzle and with less horse power than any other ACD. The direct results are more productive and shorter burns with lower horsepower requirements resulting in substantial fuel and time savings. Example: our CP2000T has only a 1.3 gallon fuel consumption per hour.

Air Curtain Destructor

The Air Curtain Destructor is by far the most cost effective way to eliminate land clearing debris and other combustible solid waste, including stumps. (Model CP2000T with leasing cost included will operate under $4.00 per hour) generating burn temperatures as high as 2200 degrees. The Air Curtain Destructor reduces combustible material to less than 1% of its original volume and does it virtually smoke free, allowing you to burn where otherwise prohibited. Portability and quick set up time helps the Air Curtain Destructor save your business up to 80% over traditional land clearing methods by eliminating costly disposal fees, minimizing equipment needs and saving time as opposed to open burns. By using the Aircurtain Destructor you eliminate the need for up to $500K of equipment needed for clearing a site, you reduce your labor needs and save time on the site.

PREFORMANCE DATA